BannerFlex Standard D3

The Bannerflex D3 represents the bench mark that all other banner systems are compared to.  With over 500,000 installations world-wide the D3 has become the lamp column banner industry’s system of choice over the last decade.  Please see our wind tunnel test page for wind-load data and interactive wind force calculator.

Key to the BannerFlex systems ability to withstand high winds is our unique and patented ‘cantilever’ arm and casting design, which holds the banner under constant tension.  When the wind blows, the force is immediately transferred from the taught banner to the fibreglass arms, which then flex and help dissipate the energy.  This all important wind spill factor is crucial in protecting the banner from excessive wear and greatly reduces the forces exerted onto the lamp column.

The system comprises of 2 tempered cast aluminium brackets and 2 UV treated fibreglass arms.   The universal bracket allows the BannerFlex system to be mounted on almost any type of pole, regardless of shape or surface, using stainless steel geared straps, traditional banding or bolts.  The arms slide into the brackets and are held in place by stainless steel set screws; a hitch pin offers an added safety feature.  The quality materials eliminate corrosion, discolouration and peeling of paint.  BannerFlex can accommodate one or two banners per pole.

Junior

Delivery Lead-times: We always keep stock of all hardware and fixings with normal lead-times 3-10 working days from date of order to delivery.

BannerFlex Warranty:

BannerFlex banner brackets are guaranteed for 10 years against defects in material and workmanship when installed according to our installation instructions using either our Tamtorque screw-gear stainless steel bands or traditional stainless steel banding.  Also and as a condition, inspection must take place 30 days after initial installation and every 60 days thereafter, making any necessary adjustments immediately.  Brackets that have been damaged by high sided or wide vehicles or flying debris are not warranted against that type of abuse.

BannerFlex Patent: Protected by US Patent #4880195
PDF Installation Instructions
PDF Technical Specifications

Key Features:

  • Durable Almag alloy bracket with 4 diametric screws and hitch pin to hold banner arm securely in place.
  • UV treated fibreglass banner arms: removable and adjustable, flex under wind loading allowing air to spill off the outside of     the banner thus reducing stress on the banner and lamp column.
  • Unique canted banner arm design: Top arm is canted up, bottom arm is canted down, and when banner is installed the canted arms put the banner under tension to transfer wind force to the fibreglass.  Produces a taut, tight and trim banner appearance with no ‘flopping’ or ‘sagging’
  • Tested to withstand up to 120mph wind force.
  • Banner arms can be supplied in any length to suit banner size required
  • Universal bracket for installation onto round/square/octagonal/fluted lamp standards
  • Integral cast loop for anchoring banner with nylon-ties
  • Available in black powder-coated finish if preferred
  • Can accommodate one or two banners per pole.
  • Engineered for durability with no moving or mechanical parts to wear-out
  • Bannerflex Standard D3 is ideally suited to pole diameters of 120mm and over and/or to accommodate a maximum banner size of 750mm x 3000mm

Choose Your Language English

 

 

 

 

 

 

 

New for 2010

The Worlds First Flexible Adjustable Wall Mounted Banner System has arrived!

 

 

 

BannerFlex Europe.Com is a wholly owned subsidiary of:

Brushwood Design Ltd
8/9 Barnstaple Street
South Molton
North Devon
EX36 3BQ

Tel: 00-44-(1)769 574501
Fax: 00-44 (1)769 574661
Email: info@bannerflexeurope.com